BSI 109 Insta-Cure+ Medium CA 8oz Period_WWII Surfaces to be bonded must

Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam

No drying or curing is necessary

but are not recommended for HIGH SHINE ALCLAD

vehicle or aircraft

AKABT170 Light Grey

BSI 109 Insta-Cure+ Medium CA 8oz Period_WWII Surfaces to be bonded mustInsta Cure+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1"