Takaab 4NOT - Quad NOT Gate / Logic Inverter Mixer Any signal or voltage put

Any signal or voltage put into the top input will be split between the 7 outputs of the module

This actually works to boost the low mids on the top two clipping types and as a subtle bass boost on the lower two

Size: 1cm (2HP) x 128

Takaab 2MIX or 2MIX-1U *

The top two options having a thinner

Takaab 4NOT - Quad NOT Gate / Logic Inverter Mixer Any signal or voltage putThe 4NOT is a simple quad NOT gate logic inverter, used for inverting clock or gate signals. If the signal at IN1 is 0 (or below 1V) then OUT1 will go high (+5V). If the signal at IN1 is high (above 1V) then OUT1 will output 0V. Each output is normalised to the next input. Therefore, without a signal plugged into it's IN an output will always be the opposite state of the output above it. So with 5V only at IN1 you will get 0V at OUTs 1 and 3 and 5V at